Questions? Give us a call, 423-524-9311 or email info@tso.co

OVER 15,000 HAPPY CUSTOMERS!

    CUSTOMIZATION MADE EASY

    SELECT YOUR DESIGN.  SELECT YOUR SIZE.

    Select Overlay Exhaust Tip Size

    8 Inch to 5 Inch Polished TSO Freedom Octagon Exhaust Tip on an OBS Ford F250

    Select Octagon Exhaust Tip Size

    TSO Octagon Exhaust Tip Size Guide






























    Aftermarket Exhaust Size


    1. Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.

    2. Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.

    3. If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.

    4.  If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.



    Outlet Size Recommendations


    1.     6 Inch 

      • Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.


    2.     7 Inch 

      • Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.


    3.     8 Inch

      • Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.


    4.    10 Inch

      • Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.

    Aftermarket Exhaust Size


    1. Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.

    2. Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.

    3. If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.

    4.  If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.



    Outlet Size Recommendations


    1.     6 Inch 

      • Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.


    2.     7 Inch 

      • Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.


    3.     8 Inch

      • Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.


    4.    10 Inch

      • Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.

    Aftermarket Exhaust Size


    1. Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.

    2. Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.

    3. If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.

    4.  If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.



    Outlet Size Recommendations


    1.     6 Inch 

      • Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.


    2.     7 Inch 

      • Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.


    3.     8 Inch

      • Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.


    4.    10 Inch

      • Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.

    Aftermarket Exhaust Size


    1. Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.

    2. Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.

    3. If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.

    4.  If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.



    Outlet Size Recommendations


    1.     6 Inch 

      • Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.


    2.     7 Inch 

      • Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.


    3.     8 Inch

      • Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.


    4.    10 Inch

      • Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.

    Aftermarket Exhaust Size


    1. Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.

    2. Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.

    3. If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.

    4.  If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.



    Outlet Size Recommendations


    1.     6 Inch 

      • Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.


    2.     7 Inch 

      • Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.


    3.     8 Inch

      • Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.


    4.    10 Inch

      • Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.

    TSO Octagon Exhaust Tip FAQ


    Our products are designed, manufactured and powder coated in the USA with a current lead time of 3 - 6 weeks

    Unlike a lot of our competitors that purchase a large bulk order of cheaply made exhaust tips from China, we do the opposite. Ensuring that you receive a High-Quality exhaust tip with a 100-Day Satisfaction Guarantee.


    YES! We take pride in the fact that our exhaust tips are Patented through the USPTO (United States Patent and Trademark Office) making it very easy to install


    YES! We put together an informative exhaust sound guide to help you select the right size exhaust tip - Click the photo below to preview TSO is included in your order!

    Click Here


    YES STAINLESS STEEL HARDWARE IS INCLUDED! Shop with confidence to know that everything needed to install your Exhaust Tip from TSO is included in your order!

    YES! TSO offers a factory 100 day Money-Back Guarantee and a 6 month manufacturing warranty for each of our Exhaust Tips at no additional cost.

    Additional options to purchase an extended warranty are available for 12 and 24 months. .



    NO. there is no need to weld this exhaust tip. Additionally, Welding the tip to your exhaust will VOID the warranty. When welding, the metal around the weld becomes weaker which could lead to the tabs breaking off.


    Our Patented Tabbed Inlet design utilizes a flow through design to aid in cooling the tip to prolong the finish.

    Since we use heavy-duty American 304 Stainless Steel, our exhaust tips are heavier than other tips on the market, so we had to get creative because a band clamp cannot support the weight of an 8lb exhaust tip. We needed a physical object, or a bolt, to prevent the tip from sliding up and down your exhaust as you hit potholes or bumps on the trail.

    The Tabbed Inlet solved that while cutting the build time in half, which means a lower cost item to produce and in turn, a higher quality exhaust tip for less.




    YES!
    Our exhaust tips are made for heavy duty 18 Gauge 304 Stainless Steel and treated with a 4-Stage powder coat.


    Us - VS- Others
    Heavy-duty American 304 Stainless Steel vs. Thin Chinese Steel
    Made in America 🇺🇸 vs Made in China
    Patented Tabbed Inlet Design vs. Round Inlet
    Security Built In vs. Welding Required
    4-Stage Powder Coating Process vs. Spray and Hope it Lasts
    6 Month Warranty vs. No Warranty

    Questions? Give us a call, 423-524-9311 or email info@tso.co

    SEE WHAT OTHERS HAVE TO SAY ABOUT OUR PRODUCTS