$599.95
ReadyLIFT Suspension now offers a 2.5" Lift Coil Spring Front leveling Kit, including our popular front track bar relocation bracket made to fit 2011-2022 Ford Super Duty F250/F350/F450 4WD diesel trucks. This gives Super Duty owners an excellent alternative for lifting the front of your truck while providing the flexibility of selecting your own aftermarket front shocks. This great new front leveling system will raise the front of your 2011-2022 4WD Super Duty truck 2.5" while including added value components such as our track bar relocation bracket. In addition, the 46-2728 coil spring system allows for increased tire sizes and widths and provides improved ground clearance and a more commanding view of the road.
This premiere leveling kit easily allows for 35" tall tires. The 46-2728 coil spring leveling kit delivers an excellent ride and handling performance! The key ingredients to improving your ride are the specially engineered coil springs teamed with a track bar relocation bracket! This combination is more than just a leveling kit. This performance and ride enhancing kit will surprise you at how well it rides and performs both on and off the road.
The ReadyLIFT 2.5" Coil Spring Front leveling kit system for 2011-2022 Ford Super Duty F250/F350/F450 trucks also included model-specific brake line extension brackets, Our time-tested bump stop extension brackets, and new front sway bar frame mount extension brackets to keep the factory sway bar where is supposed to be. So if you want rugged looks and a smooth but controlled ride, you want the new 46-2728 Coil Spring Leveling Kit System. Your truck will thank you!
NOTE: Depending on factory spring rate, Super Duty trucks may experience a minor variation in lift height. Final lift height may vary from 1.5" to 2.5".
NOTE: 2011-2016 F250 vehicles may require a rear block kit to achieve a level stance.
NOTE: Not recommended for TREMOR editions.
35x12.50.
37 is possible but may require trimming.
Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.
2.5" lift front coil springs
Sway bar spacers
Brake line extensions
Front track bar relocation bracket
Shock extensions
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
DO IT YOURSELF!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.
Estimated Installation Time: 4 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
California Residents: Prop 65 WARNING