$199.95
Dodge Ram 2500/3500 4WD Steering Box Stabilizer Bar Helps Remove Factory "Death Wobble"
Many Ram 2003-2008 2500/3500 4WD owners may have discovered their truck has "steering wander" when driving. This is caused by a design issue with the truck itself. Often the factory-inherent problem is amplified when a lift or leveling kit is installed. Whether lifted or stock, your Dodge Ram 2500/3500 4WD will greatly benefit from our Steering Box Stabilizer Bar. This specially-designed bar bolts between the front frame rails and attaches to provide support to the steering box, which results in a much better driving truck. The ReadyLIFT Steering Bar Stabilizer Bar will help eliminate the steering deficiencies in your truck by reinforcing the frame and steering box. Kit includes our super strong Steering Stabilizer Bar, greaseable bearing, hardware, and easy to read instructions.
NOTE: Not applicable for Power Wagon trucks.
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle it differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Please read the instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.
Estimated Installation Time: 3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)