$399.95
Extra heavy duty track bar for stock or lifted 2009-2013 Dodge Ram 2500 and 3500 4x4 vehicles.
1-3/8" SOLID steel (stock bar is 1.25") and can be used on stock or lifted trucks up to 6 inches.
Includes 7/8-14 threaded rod end and OEM-type Clevite rubber bushing pressed into a welded steel end fitting.
Not for use with new style radius arm design trucks.
ReadyLIFT is proud to offer 2009-2013 Dodge Ram 2500/3500 4WD truck owners a heavy duty suspension option for their lifted trucks. When you lift the suspension of a straight front axle truck, the axle wants to generally swing to the driver's side. This swinging action can affect the handling and driving comfort. This new heavy duty track bar solves that problem. Includes one (1) Heavy Duty front track bar constructed of 1.325" SOLID steel (stock bar is 1.25") and can be used on stock or lifted trucks up to 6". Includes 7/8-14 threaded rod end and OEM-type Clevite rubber bushing pressed into a welded steel end fitting.
NOTE: Not for use with new style radius arm design trucks.
Includes (1) Heavy Duty front track bar constructed of 1-3/8" SOLID steel (stock bar is 1.25") and can be used on stock or lifted trucks up to 6 inches.
Includes 7/8-14 threaded rod end and OEM-type Clevite rubber bushing pressed into a welded steel end fitting.
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle it differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Please read the instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.
Estimated Installation Time: 5 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)